Thyristor and Diode Module Rectifier

Standard single phase Rectifier

Single phase bridge rectifier with diodes (B2U)

Single phase bridge rectifier with diodes (B2U)

B2U single phase bridge rectifiers with diodes have a rating within a range of current going from 52 to 197 Amps depending on the type of component, heat sink and cooling mode.
For forced air cooling standard assemblies include a fan and a thermostat, normally closed and are designed according to the stack rating.

Option:

  • RC snubber circuit on outputs terminals of each component
  • Fuses for each phase

Single phase bridge rectifier with thyristors (B2C)

Single phase bridge rectifier with thyristors (B2C)

B2U single phase bridge rectifiers with thyristors have a rating within a range of current going from 37 to 155 Amps depending on the type of component, heat sink and cooling mode.
For forced air cooling standard assemblies include a fan and a thermostat, normally closed and are designed according to the stack rating.

Option:

  • RC snubber circuit on outputs terminals of each component
  • Fuses for each phase

Mixed single phase bridge rectifier (B2HK)

Mixed single phase bridge rectifier (B2HK)

B2HK Mixed single phase bridge rectifier have a rating within a range of current going from 37 to 155 Amps depending on the type of component, heat sink and cooling mode.
For forced air cooling standard assemblies include a fan and a thermostat, normally closed and are designed according to the stack rating.

Option:

  • RC snubber circuit on outputs terminals of each component

Standard 3 phases Rectifier

Three phase bridge rectifier with diodes (B6U)

Three phase bridge rectifier with diodes (B6U)

B2U single phase bridge rectifiers with diodes have a rating within a range of current going from 52 to 197 Amps depending on the type of component, heat sink and cooling mode.
For forced air cooling standard assemblies include a fan and a thermostat, normally closed and are designed according to the stack rating.

Option:

  • RC snubber circuit on outputs terminals of each component
  • Fuses for each phase

Three phase bridge rectifier with thyristors (B6C)

Three phase bridge rectifier with thyristors (B6C)

B2U single phase bridge rectifiers with thyristors have a rating within a range of current going from 37 to 155 Amps depending on the type of component, heat sink and cooling mode.
For forced air cooling standard assemblies include a fan and a thermostat, normally closed and are designed according to the stack rating.

Option:

  • RC snubber circuit on outputs terminals of each component
  • Fuses for each phase

Mixed three phase bridge rectifier (B6HK)

Mixed three phase bridge rectifier (B6HK)

B2HK Mixed single phase bridge rectifier have a rating within a range of current going from 37 to 155 Amps depending on the type of component, heat sink and cooling mode.
For forced air cooling standard assemblies include a fan and a thermostat, normally closed and are designed according to the stack rating.

Option:

  • RC snubber circuit on outputs terminals of each component
  • Fuses for each phase

Custom Design Rectifier

Module diode rectifier

Full module diode three phase bridge rectifier.

  • 400V
  • 700Amps
  • Forced convection cooling
  • RC snubbers + fuses
Module diode rectifier
Module thyristor/diode rectifier

Mixed thyristors/diode three phase bridge rectifier.

  • 240V
  • 480Amps
  • Forced convection cooling
  • RC snubbers + fuses
Module thyristor/diode rectifier