The 32mm / 1.26” diameter immersion heater called Supratherm32.
It is composed of an electrical resistance inserted into a high performing electrical insulator conducting heat. These are fitted in a ceramic sheath you can directly immersed into the liquid metal.
It is usually use in light metals industries, with all the attendant advantages over traditional solutions:
- No energy losses
- 99% yield
- Up to 40% energy consumption reduction
- Accurate ±2°C temperature control
- No overheating = no dross
- No metal losses
- No CO2 emissions, eco friendly
- Furnace refractory longer lifetime
Heating directly into the heart of metal guaranties an improved metal quality with no overheated areas and nearly no corundum.
Manufacturer | Atherm |
|---|---|
Sheath | Sialon |
Resistance | Nickel chromium |
Diameter | 32mm / 1.26" |
Power | 12kW** |
Power supply | From 220V to 600V |
Sheath length (between flange and end) | From 700mm / 27.56" to 1450mm / 57.09" |
Maximum heating height | 450mm / 17.52" under the flange |
Usage | Aluminum / Zinc / Magnesium |
Average lifetime | Over 13 months |
*If your technical specifications are out of scope, please contact us. Our engineering office will study your specifications and can deliver you a special design / prototype.
**It’s an example in specific conditions of use, it will depend on your bath temperature.
Reviews
There are no reviews yet.